Track

ClawM Rubber Track Traction Products

Asphalt Studs

Asphalt Studs

These Studs are safe for any asphalt application and can be installed on any rubber tracked machine such as Skid Steers, Track Loaders, or Mini Excavators. The Asphalt Studs can be used on the pavement as well as snow or ice and then during the summer, exchange the Asphalt Studs with the Carbide Studs for wonderful traction in mud, dirt and gravel.

An amazing feature of the ClawM Snow & Ice Asphalt Studs, is that they can be adjusted and reused 2-3 times! Keeping traction for your rubber track equipment just got easier. Once the Asphalt Stud gets worn down, simply use the patented ClawM Driver to loosen the Flange Nut on the inside of the track a quarter of an inch, then go to the other side of the stud and use the ClawM Driver to tighten the head to the track. This will cause the interior carbide to pop out of the top. This new design will help you get multiple uses from this snow and ice traction stud. Please contact us for product pricing.

  • One Asphalt Stud package includes:
  • 60 - Asphalt Studs
  • 60 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Installation instructions
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. 
Carbide Stud


Carbide Studs

The ClawM Carbide Studs are a great option to quickly add traction to your rubber track machine. The Carbide Studs feature quick and easy installation and works well on icy, slushy, muddy, gravel and dry dirt terrains. The Carbide Studs work perfectly with the Snow and Ice Asphalt Studs- simply install the Carbide Studs during the summer, and then when the weather changes, remove them and install the Asphalt Studs for winter. This rubber track attachment is a straight steel bolt that has a hard specially welded carbide tip to ensure secure traction over many terrains. Installation for this product is the quickest and easiest of all the ClawM rubber track traction attachments and is often used in conjunction with other ClawM attachments to obtain the full ClawM advantage. The time to install will be approximately 5 minutes per stud. However, ClawM does offer tracks with pre installed attachments. Please contact us for product pricing. Click here for customer testimonials.

  • One Stud package includes:
  • 60 - Carbide Studs
  • 60 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability.



Extreme Carbide Studs

The Extreme Carbide Studs were developed for extremely rugged terrains where you need additional traction such as going up steep inclines, in mud, ice, and snow. The Extreme Studs are a great option to quickly add traction to your rubber track. The Extreme Studs work perfectly for heavy duty operations in gravel and mine pits. These studs have an easy installation process and can be switched with other ClawM stud attachments to suit any purpose.

The Extreme Studs have an additional carbide coating and an extra-long head to provide added traction for your rubber tracks. The white Teflon bushing ensures that your stud doesn’t settle into your rubber and will always give you amazing traction on any terrain. Please contact us for product pricing on this set.

  • One ClawM Extreme Stud package set includes:
  • 60 - Extreme Carbide Studs
  • 60 - ClawM Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability.


Metal Track Studs

Metal Track Studs

These Studs are great for any steel track machinery that might need extra traction on snow, mud, ice, and gravel. These studs are custom made when you order them. We will ensure that the length of the stud head will be long enough to extend past your machine's grousers. We will also customize the length of the stud to suit the thickness of your metal track. Bolt thickness can range from 3/8" to 1-1/4" (10mm-32mm). Our personnel can help you match the size of your machine's track with the correct size stud. Just use our contact information and we will send you a quote asap.

These studs are easily installed and can be easily removed from the track if they are unnecessary for your project. Using these studs can greatly increase the amount of traction your machine gets on mud, soil, snow, ice, and gravel; we know you will find them to be highly durable and helpful for your projects.

Because the metal track studs are so customized, the pricing will depend on the model type and size of the machine you will be installing it on. This product will need two days to manufacture before product can be shipped. Please contact us for quotes and product pricing.


 

1  1/4  Carbide Claw

1 1/4" Carbide Claw

The ClawM Carbide Claw is an excellent way to increase traction on any rubber track mini excavator. The Carbide Claws work wonderfully on ice, deep snow, loosely packed dirt, and mud. ClawM Carbide Claws must be installed on an angle in order to gain the full ClawM advantage. We recomend that these products are installed on wider rubber tracks. Installing the ClawM Claws increases safety, and adds additional traction to help prevent sideways slippage. Click here to view pre-installed track prices. 

  • One Carbide Claw package includes:
  • 60 - 1-1/4” Carbide Claws
  • 120 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Drill Template
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. Please contact us for product pricing.

**The carbide claws need to be installed properly to ensure that there is no damage to the attachments or the rubber track. To ensure proper installation keep the closest end of the Carbide Claw 1 1/4" away from the front idler and rollers.**  
Carbide V Claw

Carbide V Claw

The ClawM Carbide V Claw stud provides the best degree of traction with the easiest installation out of all the Claw rubber track traction attachments. The Carbide V Claw is installed horizontally across the track, but due to the triangular V shape, will still provide strong sideways traction. This package set is great for use in rough winter conditions which include deep snow, slush and thick ice. A secondary feature of this rubber track traction attachment package set is that the V Claws will chip away at any ice on the road surface, which creates grooves and indents. These indents are proven to help increase the road surface traction for any trucks or machines working on the road.

  • One Carbide V Claws stud package includes:
  • 60 - Carbide V Claws
  • 120 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Drill Template
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. Please contact us for product pricing.
1  1/4  Carbide Claw

Mud T Claw with Carbide Studs

The ClawM T shaped steel mud bar studs are exceptionally useful during the rainy/muddy season. When the Mud T Claw Stud is installed on a rubber tracked machine, traction is greatly improved. The machine operator will immediately notice the difference in traction on any surface. The Mud T Claw digs deep into the dirt and mud, and gets grip which keeps you machine moving. Not only does it provide increased traction, but the Mud T Claw also creates a grooved and indented road surface on any dirt or mud terrain which helps other trucks and machines operate in the area. Installation of the Mud T Claw is relatively simple, and after the first Mud T Claw is installed, the installation should continue quite quickly. 
*This product is a custom build. When you order it we will need 2 days before it will be shipped to you*

  • One Mud T Claws package includes:
  • 60 - Mud T Claws
  • 120 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Drill Template
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. Please contact us for product pricing.
1  1/4  Carbide Claw

Mud Claw with Carbide Studs

The ClawM Mud Claw stud is great at providing traction on muddy and loose dirt terrains but also works great on deep snow, and thick ice. The thick steel trough bars dig deep into the dirt and provide the leverage you need to keep moving. Heavy mud, deep compacted snow, the ClawM Mud Claw will help you get through it all. This traction attachment is extremely versatile and could be a great help in the bush, on asphalt, and on snowy trails.  
*This product is a custom build. When you order it we will need 2 days before it will be shipped to you*

  • One Mud Claw stud package includes:
  • 60 - Mud Claws
  • 120 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Drill Template
  • 1 - Installation instructions booklet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. The Mud Claw is designed for heavier applications on track Loaders. Please contact us for product pricing!
1  1/4  Carbide Claw

2" Carbide Claw

This larger Claw, is very similar to the Original claw stud but is longer and should only be installed on larger rubber tracked excavators. When this product is installed, your machine will have excellent traction on ice, mud, and snow.

  • One Mud T Claw stud package includes:
  • 60 - 2" Carbide Claws
  • 120 - Flange nuts
  • 1 - ClawM Driver
  • 1 - Drill bit
  • 1 - Template
  • 1 - Installation instructions bookelet
  • One set will cover both tracks, every second lug and on both sides. Purchase a second set to cover every lug on the track for maximum traction and stability. Please contact us for product pricing.
1  1/4  Carbide Claw

The Ultimate Traction Track

Claw M is now selling fully assembled Carbide Claw and Stud Rubber Tracks!

A package set includes two rubber tracks with a fully installed Carbide Claw set and a fully installed set of Carbide Studs. Give us a call or email with the size of your rubber track, and we will make a custom quote for preinstalled product and have it back to you quickly. ClawM is a Canadian based company and can ship anywhere in Canada and the USA.
Quotes available for different track sizes and track machines. Click here for more details.
1  1/4  Carbide Claw

ClawM Driver

The patented ClawM Driver was exclusively designed for the installation of the ClawM Flange nuts. This item comes with every ClawM traction attachment set to ensure that installation goes “without a hitch”.

1  1/4  Carbide Claw

Flange Nuts

The patented ClawM Flange nuts are used to secure the Carbide Claws and Studs onto the rubber track. Our patented design ensures that the studs and Claws will not become dislodged, rip, or tear out of the rubber track. Once our traction attachments are installed, it becomes “One with the track”.

THE CARBIDE CLAWS NEED TO BE INSTALLED PROPERLY TO ENSURE THAT THERE IS NO DAMAGE TO THE PRODUCT OR THE TRACK. TO ENSURE PROPER INSTALLATION KEEP THE CLOSEST END OF THE CARBIDE CLAW 1 1/4" AWAY FROM THE FRONT IDLER AND ROLLERS.